Community

athegn1

I have both a RX100M3 and RX10M3. The 100 remote control works on my Andriod A7 phone; I see what my camera sees and I can alter values and zoom and take images using Imaging Edge.

However on the 10, on which I have also installed the Smart Remote app I can only transfer images. Why can't I also see the cameras view on the Andriod phone. Note the dialog I see on both cameras screens are identical except for 100/10.

Any advice please

Strampke

It is like it is.

I assume you tried everything.

Still let's go step by step.

- On your camera open the Smart Remote Control app.

- You will see the QR code and the SSID of your camera.

- Open the Imaging Edge Mobile app on your phone

- Tap on + Connect with a new camera

- Tap on Scan QR code or Connect with One-touch (NFC) or Connect using the camera SSID/password

Did you set Shooting mode to Manual, P, S or A? Smart remote control does not function in Intelligent Auto or Superior auto.

View solution in original post

Strampke

There are functions that are or are not supported, which explain everything.

Watch this page

or click on the added file Supported functions.

athegn1

I may not have explained properly. I understand that most of the controls will have to be operated on the camera and not on the Andriod, unlike the 100. However I want to what the camera is seeing on my Andriod and also showing what the camera controls are set at, as I can if I connect the camera to a PC; can take a shot but have to go to the camera to change settings

I want to setup my 10 on a tripod near my bird feeder and when I see a shot I want on the Andriod takes the image by pressing a button on the Andriod.

Are you saying that the 10 cannot do this on Andriod whereas a Pc can and the 100 can on Andriod?

Strampke