Up until now this is the only way to refrain the tv from moving out of the corrent colour temperature.
aka leaving IP control on.
doesn't neet to use remote start.
also, when you enable Ip control on. you will notice there is a slight gray frame that shows up as son as you enter the ip control menu.
The same thing also shows up when you power on the tv after some hours.
(if you're in the home menu).
doesn't bother me much, cause at least it will still be at the right color temperature,
but it's a bit of a hassle having to see a grey thing showing up out of no where in front of the menu.
regarding the 20w problem. i don't think it will affect the tv.
there are worst things. like when you shut it down (with ip control off) and it never sleeps properly, waking out from 0,5 watts to 20 watts each 5 minutes when the wireless or network cable is on. I
think it's better to be at 20w fixed all times and idle than to power on from 5w to 20w and calling home, powering up the processor like nuts each 5 minutes, then turning off. At 20w, at least everything is idle more or less, not wrecking the PSU.
I am actually disconecting my home theater tv (also android) from wireless network so it will
go fully sleep mode.
But I am leaving my 50w805c on the wireless network on, tho. in my room.
The latest update tok off the APP UPDATE menu from the HELP and the ABOUT menu.
With it was possible to feed the Google Store Update list without having to leave the
auto update option on; ud pic what you wanted to update then you'd be good -- in my case, never
updating to the horrible youtube 2;19 update.
Well, now it seems my tv will be like windows 95.... never updating apps. because I wont turn on the
Auto update... wont have this new horrible youtube app.
Just a heads up for this tv owners -- this update seems to have been only for our models, nothing on the D line yet.
Naznačite sviđanje na Facebooku
Pretplatite se na YouTubeu